OD50.8mm ASME SA179 Cold Drawn Seamless Steel Pipe Length ≤ 16m
ASME SA179 COLD DRAWN SEAMLESS CARBON STEEL PIPE FOR HEAT -
EXCHANGER AND CONDENSER
Surface Treatment: Oiling/Black painting/Varnish/Passivation/Phosphating/Bare
Ends: BE/PE, ends caps
Marking: as per requirement
Delivery Condition: Annealed/Normalized/Tempered/As required
OD:3.2mm – 76.2mm (1/8 – 3 in.)
Length: ≤16m. Fixed Length (6m,9m,12m, 16m or as per requirement)
or random length
Package: Hexagonal Bundles with steel strips and plastic wrapping
outside/Wooden box/Wooden crate/Steel frame/As per customer’s
Tensile Strength σb(Mpa)
Yield Strength σs(Mpa)
SEAMLESS COLD DRAWN
INSPECTION AND TEST:
CHEMICAL COMPOSTION TEST. MECHANICAL PROPERTIES TEST(tensile
strength, yield strength, elongation, flaring, flattening,
flanging, bending, hardness, etc). SURFACE AND DIMENSION CHECK.
NON-DESTRUCTIVE TEST(eddy current test/ultrasonic test), hydraulic
Cold Drawn seamless carbon steel pipe for condenser and
Size range from OD3.2~76.2mm (1/8 – 3 in.), WT as per customer’s
Top quality products
1. Heat supply
3. Heat transfer equipment
5. Low and medium pressure boiler, etc.
Good quality control starts from billet selection. Serious attitude
during production and inspection.
Best price with Good quality and Good service!